S2S

S2S v3 Dual Stage Sit Stand Desk Base

$999.00 $649.00 (You save $350.00)
Availability: Usually ships within 7 business days
Current Stock:
Power Source: Electric Legs: 2 Legs Work Surface: Base Only
SKU: S2S-V3-DS2B
Full Description

The All New Dual Stage S2S v3 standing desk which meets the ANSI/HFES 100-2007 standard combines unique, sustainable materials with expert design for a state-of-the-art column and drive sysytem. Our anodized aluminum column design features a durable four-piece construction using US military-vehicle adhesives to create rich, clean lines without holes, crimps, or weld splatter.

The S2S v3 height adjustable desk features a very quiet, compact, in-line motor/drive system that fits inside a 43-millimeter diameter column. With minimal clearance required for the shroud to wrap, our standard customs can provide elegant and slender appearance under the work structure. 

1ad1.png

S2S v3 Feet:

S2S v3 height adjustable desk feet and frames come in various configurations and designs to suit your needs. Feet are available in multiple lengths to accommodate work surfaces of varying sizes. Available in both black and silver powder-coat colors, S2S v3 feet are made of   7-gauge steel with 5/16”-18” threaded holes for attaching glides. Custom designs and colors are also available.

Two applications are available for mounting the feet to the leg columns: Standard and Dive. With a standard mount application, the leg column sits on top of the foot while the dive mount option is used when lower start heights that are required to meet the ANSI/HFES 100-2007 standard.

 

Frames:

Frames are available to support one, two and three leg table applications. Standard two-leg table configurations utilize a simple top plate stretcher bar assembly, to minimize profile depth and maximize knee clearance below the work surface.

Consider the following:

  • For work-surfaces less than 46" wide and less - Frameless Application,  
  • 48" to 50" work-surface - 44" crossbar
  • 52" to 54" work-surface - 48" crossbar
  • 56" to 58" work-surface - 54" crossbar
  • 60" to 62" work-surface - 56" crossbar
  • 64" to 66" work-surface - 60" crossbar
  • 72" to 74" work-surface - 68" crossbar
  • 76" to 78" work-surface - 72" crossbar
  • For oversized table applications, two bar frame assembly is available if additional stability is required.
  • Feet & frames can both be customized to fit your work-surface needs.
  • Three-leg configurations do not stretcher bars and come standard with top plates only.

picture1.png

Actuation:

Single and dual-stage electric actuation is available to meet a variety of adjustament ranges. S2S v3 electric adjustable height systems feature a software-based electronic protection system (ISP-Intelligent System Protection) to reduce the risk of obstacles being trapped or crushed.

An optional actuator-integrated, sensor-based ISP is also available to provide a higher level of sensitivity for collision prevention.

 

 

ACTUATION

Single-Stage Electric

Dual-Stage Electric

COLUMN DIMENSION

2.6” X 4.9”

2.6” X 4.9"

SPEED

1.5” per sec.

1.5" per sec.

STROKE

19”

26”

INSTALL HEIGHT

26” - 45” Standard Mount
24.7” - 43.7” Dive Mount

22.5” – 48.5” Standard Mount
21.2” – 47.2” Dive Mount

GLIDE ADJUSTMENT

0.5"

0.5"

NOISE LEVEL

<49 dB

<49 dB

COLOR

Black or Silver Anodized

Black or Silver Anodized

LOAD CAPACITY

176 lbs. per leg (dynamic)
292 lbs. per leg (static)

176 lbs. per leg (dynamic)
292 lbs. per leg (static)

DUTY CYCLE

2 min. on/18 min. off

2 min. on/18 min. off

ANTI-COLLISION CONTROL

ISP (Intelligent System Protection)

ISP (Intelligent System Protection)

HAND CONTROLS

Simple Switch (up/down)
Optional display handset w/ memory

Simple Switch (up/down)

Optional display handset w/ memory

**All S2S v3 systems have been tested and exceed BIFMA requirements**

 Electronics:

With a wide array of state-of-the-art controls, our S2S v3 adjustable height table systems are incredibly easy to operate. Our control boxes and programmable handsets offer easy motility, quick installation, and safety features that reduce the risk of fingers getting trapped or crushed. Customize your S2S v3 system by choosing between a variety of control options.

2141.png171.pngcontrol.png