S2S 3 Leg Designer Laminate Standing Desk

The Sit 2 Stand Height Adjustable 3 Leg Standing Desk has been thoughtfully designed to feature an extraordinary attributes such as: height range (24" to 50") that will fit the smaller framed person sitting to the tallest percentile standing. The S2S Height Adjustable Desk offers a standard feature that is not offered on any other desk of its type; Programmable memory - 4 presets with digital LED height readout. Just check all the other height adjustable desks, its consider an upgrade; Not the S2S Desk, it's a standard feature! 

S2S Desk Features:

• Choose between 2 different Controllers
• 3 Leg "L-Shaped" base adjusts to meet your tale top from both sides" L-Shapped Base  can adjust to meet table tops from as small as 48"Wx48"Wx24"D or as large as 78"Wx80"Wx34"D
  
• Desk Raises & Lowers at 1.5" per second speed
• 529 lb lift capacity 
• Full range height (24" - 50")
• Our control box includes: soft start/stop, hall sensor for speed and alignment
• Sturdy Steel Construction
• Triple Whisper Quiet Motors (one per leg)

**  Please note All Desk Systems (base & top) or Desk Top Only are delivered via commercial truck on a pallet and delivered to the curb.  If other delivery methods are required addtional fess will apply.  If the shipping destination is to a residence or a business without a loading dock, a liftgate will be required.  Please state this information in the notes section on your order.

Table Top Sizes:

Choose between Extended Corner Left or Right. Below is a diagram to show you the dimension sizes per size, arrange by letters (a)(b)(c)(d)

	Extended Corner Left 24"(a) x 48"(b) x 60"(c) x 24"(d) 24"(a) x 48"(b) x 60"(c) x 30"(d) 24"(a) x 48"(b) x 72"(c) x 24"(d) 24"(a) x 48"(b) x 70"(c) x 30"(d) 30"(a) x 48"(b) x 70"(c) x 30"(d) 30"(a) x 48"(b) x 60"(c) x 30"(d) 30"(a) x 48"(b) x 72"(c) x 24"(d) 30"(a) x 48"(b) x 70"(c) x 30"(d)
	Extended Corner Right 24"(a) x 48"(b) x 60"(c) x 24"(d) 24"(a) x 48"(b) x 60"(c) x 30"(d) 24"(a) x 48"(b) x 72"(c) x 24"(d) 24"(a) x 48"(b) x 70"(c) x 30"(d) 30"(a) x 48"(b) x 70"(c) x 30"(d) 30"(a) x 48"(b) x 60"(c) x 30"(d) 30"(a) x 48"(b) x 72"(c) x 24"(d) 30"(a) x 48"(b) x 70"(c) x 30"(d)

Laminate Colors & Edge Colors

All Laminate Tabletops are custom made to order and ship directly from the manufacturer within 3 Business Weeks.

 Choose from large variety of laminate options and edge colors which can be used in any combination. Please be advised tops are custom made to order and not returnable. 

** Please note: tops do not come pre-drilled. Tops are delivered on a pallet at curbside via LTL freight. **

Tabletop Colors

Designer Laminate Tabletop Colors

Desk Controller Options:

Up Down Controller	Quick Touch 4 Memory Preset Controller

Cable Management Options:

Designed to house and route cables, power strips and ballasts, NeatLinks improves access to and protection of technology used in modern workspaces. The system keeps technology and cords off the floor to maintain an organized work area and facilitate cleaning under desks. NeatLinks are designed for quick, easy installation—in any direction, to almost any plane—with two screws or mounting tape, and can be installed in countless configurations to accommodate each user and unique work environment.

NeatLinks Small - 17" 3.6" Dia/ Black	NeatLinks Large - 24" 3.6" Dia / Black

Caster Options: Ships with the desk base

Hardwood Locking (set of 4)  $39.00	Carpet Locking (set of 4)  $39.00
75mm ( 3" Diameter ) Un-Hooded Twin Wheel 110 lbs Dynamic Capacity Solid Nylon Construction Soft Polyurethane Wheels Optional Wheel Brake Steel Axle Color Black Over All Height - Stem Casters - 3 1/2" Over All Height - Plate Casters - 3 3/4" Swivel Radius - Non-Brake - 2 3/8" Swivel Radius - Brake - 3 7/16"	60mm Un-Hooded Twin Wheel - 2 3/8" Diameter 130 lbs Dynamic Capacity Solid Nylon Construction Solid Nylon Wheels Wheel Tread approx 1/2" wide Steel Axle Color Black - Gray Spokes Optional Wheel Brake Over All Height - 2 3/4" Swivel Radius - 2" - Non-Brake Swivel Radius - 3 1/16" - Brake

Powerstrip Options: